eta RAGGIO Bedienungsanleitung Seite 72

GB
Problem
Red light is on and
Front bumper
4x acoustic signal is
error
sounding
The red light is on
Front wheel
and an acoustic
error
signal is sounding
The red light is
Side brush
on and 2 acoustic
error
signals are heard
The red light is on
Master brush and an acoustic
error signal is sounding 3
times
Vacuum
Red light is on and
cleaner
4x acoustic signal is
movement
sounding
error
The red light is on
Slope error and a 5x acoustic
signal is sounding
The red light is on
Charging and an acoustic
station error signal is sounding 3
times
Insufficient Red light is on and
battery an acoustic signal is
capacity sounding
The red light is on
Ventilator
and 5 x acoustic
error
signal is sounding
Red light is on and
Unknown another acoustic
error signal is sounding
(e.g.1,5 second)
Signalling
The front bumper is
locked
The front wheel is dirty
or jammed
The side brushes are
dirty or stuck
The main brush is dirty
or stuck
The vacuum cleaner
is stuck and has no
possibility of movement
The vacuum cleaner is
too inclined
The charging station
is not found or is not
plugged in. sewing
Battery capacity is
too low and vacuum
cleaner is not on the
charging station
Ventilator is blocked
Unknown cause of the
problem
GB - 72
Cause
Check the front
bumper and remove
the cause of the
blockage
Check and clean the
front wheel
Check and clean the
side brushes
Check to clean the
main brush
Check that the
vacuum cleaner is not
jammed (e.g. between
furniture)
Place the vacuum
cleaner on a level
floor
Check the vacuum
cleaner and make
sure that the charging
station is properly
connected to the
mains. sewing
Place the vacuum
cleaner on the
charging station a let
the battery sufficiently
charging
Check and release
the ventilator
Restart the vacuum
cleaner
Solution