Warranty - Collomix Xo 10 NC Originalbetriebsanleitung

Care and maintenance
Remove the battery from the power tool before
transporting, storing or performing any work on
the power tool (e.g. maintenance, tool change,
etc.). There is a risk of injury if the ON / OFF switch
is pressed accidentally.
Clean the machine and the mixing tool immediately
after use. We recommend that you use the Collomix
MIXER CLEAN cleaning bucket for cleaning.
Fett
Grease
Graisse
Smar
intervals with suitable grease.
Keep the ventilation slits clean and clear at all
times so that the machine can be properly cooled.
Blocked ventilation slits will lead to irreparable
damage to the machine.
Make sure that the ON/OFF switch moves and
releases smoothly at all times.
The machine is equipped with self-deactivating
carbon brushes. This means that the machine will
shut itself down once a certain level of wear is
reached. The carbon brushes can be replaced by
the authorized customer service center or by the
Collomix Service center.
Have repairs carried out only by an approved
workshop or by your Collomix Service.
Only use original Collomix accessories and
replacement parts.
For exploded drawings, lists of replacement parts
and the form for repair orders, please refer to:
http://www.collomix.com
Disposal
The device, accessories and packaging should all
be consigned for environment-friendly recycling.
Battery packs must not be disposed of together
with household waste! Return defective or used
battery packs to your dealer!
Do not throw battery packs into water!
For EU countries only:
Do not dispose of power tools together with
household waste.
According to EU Directive 2002/96/EC on waste
electrical and electronic equipment and your
country's transposition into national law, power
tools that are no longer usable must be col-
lected and sent to an eco-friendly recycling facil-
10
Keep the HEXAFIX coupling
clean and freely moving at all
times.
Take the mixing tool out of
the coupling after you have
finished your work.
Grease the hexagon mount
of the coupling at regular
ity. Discharge the battery pack in the power tool
before disposal. Protect the contacts against short-
circuit (e.g. insulate with adhesive tape).

Warranty

The manufacturer provides a warranty within the
framework of his terms and conditions of delivery
in accordance with the requirements of statutory/
country-specific provisions. Should you need to
make a claim under the warranty, please provide
us with your invoice or delivery note.
On no account will any warranty claims be
accepted if any repairs are carried out by third
parties. In the event of any irregularities, please
send the machine to us. Complaints can only be
accepted if the device is sent to the Collomix
Service center undismantled.
The warranty does not apply to damages
caused by normal wear, overloading, improper
handling, unsuitable accessories or inadequate
maintenance.
Any structural or functional modifications to the
machine which are made without our agreement
shall render the warranty and the Declaration of
Conformity null and void.
Subject to change.
Manufacturer:
Collomix GmbH
Daimlerstrasse 9
85080 Gaimersheim
Germany
EN