Warranty - Collomix Xo 1 R Originalbetriebsanleitung

Care and maintenance
Take the mixing tool out of the
Fett
Grease
your work.
Graisse
Grease the hexagon mount of the
Smar
coupling at regular intervals with
suitable grease.
so that the machine can be properly cooled. Blocked
machine.
Make sure that the ON/OFF switch moves and releases
brushes. This means that the machine will shut itself
down once a certain level of wear is reached. The carbon
brushes can be replaced by the authorized customer
service center or by the Collomix Service center.
Have repairs carried out only by an approved workshop
or by your Collomix Service.
Only use original Collomix accessories and replacement
parts.
For exploded drawings, lists of replacement parts
and the form for repair orders, please refer to:
Disposal
The device, accessories and packaging should all be
consigned for environment-friendly recycling.
service lives must be made unusable by removing the
mains power cable.
Do not dispose of electrical tools with
household waste.
concerned with used electrical and electronic
collected separately and consigned for environment-
friendly recycling.

Warranty

The manufacturer provides a warranty within the
accordance with the requirements of statutory/country-
under the warranty, please provide us with your invoice
or delivery note.
On no account will any warranty claims be accepted if
Complaints can only be accepted if the device is sent to
the Collomix Service center undismantled.
The warranty does not apply to damages caused
by normal wear, overloading, improper handling,
unsuitable accessories or inadequate maintenance.
machine which are made without our agreement shall
null and void.
Subject to change.
Manufacturer:
Collomix GmbH
Daimlerstrasse 9
85080 Gaimersheim
Germany