Ruris RX 655 Handbuch Seite 52

Knife removal, replacement, sharpening
Cuplaj
Lama
Surub Hex HD
●
When removing the knife for sharpening or changing, protect your hands with a pair
of thick gloves when holding the knife.
● Remove the HEX HD screw and washer that hold the knife.
Caution: Periodically inspect the knife adapter for cracks, especially if you
hit a hard object. Replace it when necessary.
When sharpening the knife follow the original angle of the edge as a reference point. It is
extremely important that each cutting part of the knife is equally sharpened to prevent the
knife from becoming unbalanced. An unbalanced blade will cause excessive vibration
when the engine revs. Before reinstalling the blade and blade adapter, lubricate the motor
shaft with oil. Be sure to install the blade with the numbered face down when the machine
is in the operating position.
● Insert the blade adapter into the motor shaft.
●
Place the knife in the adapter. Make sure it is aligned and seated on the adapter.
●
Place the flat washer on the blade.
● Replace the Hex HD screw.
NOTE: To be sure that the machine is working well, the knife screw should be inspected
periodically ( tightness).
Saiba lama
EN
23