Ruris RX 655 Handbuch Seite 45

EN
8. COMMISSIONING
8.1 STARTUP
BEFORE STARTING
Always position yourself with hands and feet away from moving parts of the equipment.
Start, store and power the lawnmower in a horizontal position. Start the machine on a
hard surface or on a section of grass that has already been cut.
Check the oil level in the engine bay.
Connect the plug to the spark plug
The engines equipping these machines can be equipped with:
- Priming pump
- Manual shock
- Thermal shock
STARTING: For engines equipped with a priming pump
Starting by actuation (starter): Prime the carburetor by actuating the priming pump
located on the air filter cover (3-4 actuations). Pull the emergency stop handle with your
left hand and stick it to the guide handle. Grasp the starter handle with your right hand
and pull gently until you feel resistance. Then pull steadily to start the engine. After the
engine has started, let it reach maximum speed, after which you can start working.
STARTING: For engines equipped with thermal shock
Pull the emergency stop handle with your left hand and stick it to the guide handle. Grasp
the starter handle with your right hand and pull gently until you feel resistance. Pull
16