Ruris RX 655 Handbuch Seite 46

steadily to start the engine. After the engine has started, let it reach maximum speed,
after which you can start working.
STARTING: For engines equipped with manual shock
Push start (starter): Pull the emergency stop handle with
your left hand and stick it to the guide handle and position
the choke lever in the closed position and operate the
throttle lever to full (if equipped). Grasp the starter handle
with your right hand and pull gently until you feel resistance,
then steadily to start the engine, then move the choke lever to the open (operating)
position. After the engine has started, let it reach maximum speed, after which you can
use it for work.
AUTOMATIC START (with the key): If the machine is also equipped with automatic
start, the start will be done by operating the key following the starting steps depending on
the engine equipment.
8.2 TERMINATION
2) Release the safety brake (engine-stop) control lever.
Note: Shutdown (for machines equipped with an accelerator lever, the stop will be made
after reducing the engine speed to minimum, after which you release the control handle
of the engine-stop safety brake).
8.3 OPERATION
Caution: Keep hands and feet away from the active area of the cutting knife.
NOTE: For best results, raise the cutting position until you determine which
height is best for the machine.
CAUTION: The blade continues to rotate for several seconds after the engine
is turned off.
USING THE LAWN MOWER
EN
17