Lenze E82MVxxx 2B Serie Montageanleitung Seite 98

4 Mechanical installation
Motor mounting
Preparation
1a
1a
Motor preparation:
Remove terminal box seal 0 and motor terminal board.
l
l If necessary, extend the motor cable.
Mount the carrier housing to the motor:
If required, use the distance and wall mounting plate (2) and the terminal box seal 0 .
l
l The mounting and fixing must ensure a permanently tight mechanical connection, for instance by
using serrated lock washers 1.
Perfect sealing is required to ensure IP65 enclosure.
98
A
Fig. 4−3
l
2
A
M20 M16
4 × 2 ×
B
3.4 Nm
30 lb-in
1a
8200mot053
EDK82MV371 DE/EN/FR 7.0