Important Controller Codes - Lenze E82MVxxx 2B Serie Montageanleitung

Important controller codes

)
Note!
The following table describes in detail the codes mentioned in the
ƒ
examples for commissioning!
Do not change codes, the meaning of which is unknown to you! All codes
ƒ
are described in detail in the System Manual.
How to read the code table
Column Abbreviation
Code Cxxxx
1
2
*
v
s
(A)
uSEr
Designation
Lenze
à
Selection 1
IMPORTANT −
EDK82MV371 DE/EN/FR 7.0
Meaning
Code Cxxxx
Subcode 1 of Cxxxx
Subcode 2 of Cxxxx
Parameter value of the code is the same for all parameter sets
and can be changed in parameter set 1
Keypad E82ZBC
Keypad XT
EMZ9371BC
Keypad E82ZBC
Keypad XT
EMZ9371BC
Code, subcode or selection only available for operation with
application I/O
Code is contained in the Lenze setting in the USER menu
Name of the code
Lenze setting (value at delivery or after restoring the delivery
status with C0002)
Further information can be obtained from the "IMPORTANT"
column
{%} 99 Min. value
Brief, important explanations
l
Commissioning
Important controller codes
l The parameter value of the code can be
defined differently within each
parameter set
l The parameter value is accepted
immediately (ONLINE)
Changed parameter of the code or subcode
will be accepted after pressing v
Changed parameter of the code or subcode
will be accepted after pressing T V
Changed parameter of the code or subcode
will be accepted after pressing v if the
controller is inhibited
Changed parameter of the code or subcode
will be accepted after pressing T V if
the controller is inhibited
{unit} max. value
7
117