Manual Setup; Setup Help; Changing Between Light And Dark Switching; Locking And Unlocking Buttons - Micro-Epsilon Colorcontrol Mfa-1 Bedienungsanleitung

Operation and Settings
6.5
To increase or reduce sensitivity levels in increments for optimum settings:
6.6
This feature helps to find the correct working distance.
The
The medium frequency range indicates the correct working distance.
6.7
Lo = Light switching
Do = Dark switching
i
6.8
Press the
colorCONTROL MFA-1

Manual Setup

Press the button once or several times to increase sensitivity.
Lo-Do
Press the button once or several times to reduce sensitivity.

Setup Help

SET
Press the button for 4 seconds until the
t
Δ
symbol can blink in 3 different frequencies, relative to the signal received.

Changing between Light and Dark Switching

Press the button for 4 seconds to switch between output signals.
Lo-Do
Changing the output signal does not affect the switching state display.

Locking and Unlocking Buttons

and buttons for 4 seconds to lock the buttons.
Lo-Do
Repeat to unlock the buttons.
Δ
symbol starts blinking.
Page 29