Ce Compliance; Proper Use; Proper Environment - Micro-Epsilon Colorcontrol Mfa-1 Bedienungsanleitung

Safety
1.3
The following applies to the colorCONTROL MFA-1: EMC Directive 2004/108/EC
Products which carry the CE mark satisfy the requirements of the EMC regulation 2004/108/EC 'Electromag-
netic Compatibility' and the European standards (EN) listed therein. The EC declaration of conformity is kept
available according to EC regulation, article 10 by the authorities responsible at
MICRO-EPSILON Eltrotec GmbH
Heinkelstr. 2
D-73066 Uhingen, Germany
The system fulfills the specification of the EMC requirements, if the instructions in the instruction manual are
followed.
1.4
The colorCONTROL MFA-1 LED analyzer is an opto-electronic sensor that is used in conjunction with a fiber
optic cable (POF 2.2 mm) to test intensity and function of illuminants, such as LEDs and incandescent bulbs.
-
-
-
-
1.5
-
-
-
-
-
colorCONTROL MFA-1

CE Compliance

Proper Use

The system may only be operated within the limits specified in the technical data
Use the sensor in such a way that in case of malfunctions or failure personnel or machinery are not endan-
gered.
Take additional precautions for safety and damage prevention for safety-related applications.

Proper Environment

Protection class:
Operating temperature:
Storage temperature:
Humidity:
Ambient pressure:
IP 65
0 ... 60 °C (+32 to +140 °F)
-20 ... +80 °C (-4 to +176 °F)
20 - 80 % (non-condensing)
atmospheric pressure
, see Chap. 2.
Page 22