Respekta CH 22078 IX B Bedienungsanleitung Seite 25

increased risk of fire.
Take off all rings and bracelets before cleaning or maintaining the
appliance; otherwise you will damage the surface of the appliance.
1. Clean the housing of the appliance with a suitable detergent. Use such a product
carefully and economically.
2. Do not clean the control panel with a detergent. Use a damp cloth.
Otherwise you may damage the electronic components of the controls.
3. Never use any alcohol-containing detergents to clean matt black painted
appliances as these detergents cause colour-changes.
4. Clean the glass panels
5. When you clean or replace the grease filters or the carbon filters also clean all
visible components on the bottom of the appliance with a mild, non- acrid and
fat-dissolving detergent.
6. Do not damage the grid of metal-made grease filters. The colour of the metal
surface may change due to frequent cleaning as well as the use of aggressive
detergents.
7. Such changes do not influence the capacity of the appliance and are no reason
for complaint.
8. Do not use a steam cleaner. RISK OF ELECTRIC SHOCK!
9. Do not use any abrasive detergents.
Grease filter
You do not need to replace aluminium filters. Clean them once a month by hand or
in a dishwasher (30
abrasive detergents! Do not use any alkaline dishwasher-detergents! (ph more than
7). Do not put the filter in the dishwasher together with tableware Filters which are
blocked with food debris do not carry a guarantee. Dry the filters properly before
you reinstall them.
Replacing of the illuminant
Do not touch the illuminant with your hands. The sweat on your fingers will
reduce the operating time of your new illuminant. Use a thin cloth or a thin
glove.
WARNING! Disconnect the appliance from the energy supply.
1.
4
Equipment depends on model.
NOTICE!
4
with a suitable detergent only.
Aluminium filter
0
). Do not use any acrid or corrosive detergents. Do not use any
25