Herunterladen Inhalt Inhalt Diese Seite drucken

Koenic KDD 211 A NF IN Bedienungsanleitung Seite 20

Inhaltsverzeichnis
Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
Size - A5
English
Installation
Place the unit on a level and stable
Fig.
1
surface. Keep the minimum distances
to all sides.
Fig.
Unevenness can be compensated with
2
the adjustable front feet. Use a spirit
level for correct positioning.
The refrigerator and freezer are
Fig.
3
equipped with glass shelves and
drawers, which, if desired can be
removed by pulling them forward. The
upper shelf can be inserted at different
heights.
Warning
If the refrigerator has been stored or tipped
sideways during transport or installation, it
must stand upright for 12 hours before being
connected to the mains.
Note:
There is a rubber buffer on the inside of each
door that must not be removed.
Danger of suffocation
Keep the rubber buffers away from children!
Door adjustment
If the top or bottom edges of the refrigerator
doors are not aligned, they can be adjusted
with a spanner. Loosen the locking nut
counterwise. Rotate the adjusting nut
counterclockwise to adjust the height of
the door. When the door is correctly aligned,
tightened the locking nut clockwise.
20
IM_KDD 211 A NF IN_240711_V05_HR.indb 20
IM_KDD 211 A NF IN_240711_V05_HR.indb 20
Operation
Plug the power plug into an appropriate
Fig.
4
mains socket outlet.
Note:
Allow the product to precool for about 2-3
hours before putting in the food.
Settings
The control panel is locked in normal
Fig.
5
operation. Before adjusting the settings
described below, press the lock/
unlock key MODE SELECT for at least
3 seconds. The symbol
all keys are unlocked.
Freezer temperature setting
Press the TEMP SELECT button until
Fig.
6
the indicator starts flashing.
Press the +/- button repeatedly until
the desired temperature is shown. The
temperature can be set from -24°C to -
16°C in 1°C temperature steps.
Refrigerator temperature setting
Press the TEMP SELECT button until
Fig.
7
the indicator starts flashing.
Press the +/- button repeatedly until
the desired temperature is shown.
The temperature can be set from +2°C
to +8°C in 1°C temperature steps.
turns off and
12/7/2024 13:59
12/7/2024 13:59
Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Kdd 211 a nf in bKdd 211 c nf inKdd 211 c nf in b

Inhaltsverzeichnis