Intended Use; Technical Data - EINHELL BG-BC 25 AS Originalbetriebsanleitung

Anleitung_BG_BC_25_AS_SPK7:_
Spark plug wrench
Open-ended spanner 8/10mm
Allen wrench 4 mm
Allen wrench 5 mm
2 ea. tie wraps
Knurled screw M6
Nut M6
Washer Ø 6mm
Protective hood for nylon line/trimming blade
Screwdriver
Original operating instructions
Safety information

4. Intended use

The power scythe (using the cutting blade) is
designed for cutting young trees, strong weeds and
undergrowth.
The power trimmer (using the line spool with cutting
line) is designed for cutting lawns, grassed areas and
small weeds. The operating instructions as supplied
by the manufacturer must be kept and referred to in
order to ensure that the equipment is properly used
and maintained. Any use which is not expressly
permitted in the manual may result in damage to the
equipment and place the user in serious danger. Be
sure to observe the restrictions in the safety
instructions.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
equipment is used in commercial, trade or industrial
businesses or for equivalent purposes.
Important. Due to the high risk of bodily injury to the
user, the petrol power scythe must not be used to
carry out the following work: to clean dirt and debris
off walkways, or to chop up tree or hedge clippings.
Moreover, the petrol power scythe may not be used
to level out high areas such as molehills. For safety
reasons, the petrol power scythe may not be used as
a drive unit for other work tools or toolkits of any kind.
The equipment is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user/operator and not the manufacturer
will be liable for any damage or injuries of any kind
caused as a result of this.
05.10.2010 8:47 Uhr Seite 19

5. Technical data

Engine type
2-stroke engine, air-cooled, chrome cylinder
Engine power (max.)
Displacement
Idle speed of engine
Max. engine speed
Max. speed of double nylon line:
Ignition
Drive
Weight (with empty tank)
Cutting line diameter
Cutting circle diameter of blade
Cutting line length
Cutting line diameter:
Tank capacity
Spark plug
Sound and vibration
Sound pressure level L
Uncertainty K
Sound power level L
Uncertainty K
Wear ear-muffs.
The impact of noise can cause damage to hearing.
Functions
Vibration emission value a h = 11.5 m/s
K uncertainty = 1.5 m/s
Reduce noise generation and vibration to a
minimum!
Use only equipment that is in perfect condition.
Maintain and clean the equipment regularly.
Adopt your way of working to the equipment.
Do not overload the equipment.
Have the equipment checked if necessary.
Switch off the equipment when not in use.
Wear gloves.
0.75 kW (1 HP)
25.4 ccm
3,200 min
8,500 min
6,000 min
Electronic
Centrifugal clutch
100 dB(A)
pA
pA
108 dB(A)
WA
WA
2
2
GB
-1
-1
-1
6.1 kg
42 cm
23 cm
4 m
2 mm
0.45 l
L8RTC
3 dB
4,4 dB
19