Proper Use; Technical Data - EINHELL GC-BC 30/1 AS Originalbetriebsanleitung

28. Allen key 4 mm
29. Allen key 5 mm
2.2 Items supplied
Please check that the article is complete as
specifi ed in the scope of delivery. If parts are
missing, please contact our service center or the
sales outlet where you made your purchase at
the latest within 5 working days after purchasing
the product and upon presentation of a valid bill
of purchase. Also, refer to the warranty table in
the service information at the end of the operating
instructions.
•
Open the packaging and take out the equip-
ment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
available).
•
Check to see if all items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, please keep the packaging until
the end of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or suff ocating!
•
Petrol scythe mower
•
Guide pin
•
Operating handle
•
Operating handle retainer
•
Carrying strap
•
Trimming blade
•
Spool with nylon line
•
Driving plate
•
Pressure plate
•
Pressure plate cover
•
Nut M10 (left-hand thread)
•
Combined oil/petrol cylinder
•
Spark plug wrench
•
Hexagon wrench 4 mm
•
Hexagon wrench 5 mm
•
Pull hook
•
Knurled screw M6
•
Protective hood for nylon line/trimming blade
•
Original operating instructions
•
Safety instructions
Anl_GC_BC_30_1_AS_EX_I_SPK9.indb 20 Anl_GC_BC_30_1_AS_EX_I_SPK9.indb 20
GB

3. Proper use

The power scythe (using the cutting blade) is
designed for cutting young trees, strong weeds
and undergrowth. The power trimmer (using the
line spool with cutting line) is designed for cutting
lawns, grassed areas and small weeds. The ope-
rating instructions as supplied by the manufactu-
rer must be obeyed to ensure that the equipment
is used properly. Any use which is not expressly
permitted in the manual may result in damage
to the equipment and place the user in serious
danger. Be sure to observe the restrictions in the
safety instructions.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
equipment is used in commercial, trade or indust-
rial businesses or for equivalent purposes.
Danger! Due to the high risk of bodily injury to the
user, the petrol power scythe must not be used to
carry out the following work: to clean dirt and deb-
ris off walkways, or to chop up tree or hedge clip-
pings. Similarly, the petrol power scythe must not
be used to level out high areas such as molehills.
For safety reasons, the petrol power scythe must
not be used as a drive unit for other work tools or
toolkits of any kind.
The equipment is allowed to be used only for its
prescribed purpose. Any other use is deemed to
be a case of misuse. The user/operator and not
the manufacturer will be liable for any damage or
injuries of any kind resulting from such misuse.

4. Technical data

Engine type .........................................................
........ 2-stroke engine, air-cooled, chrome cylinder
Engine power (max.) ................... 0.9 kW (1.2 HP)
Displacement ...........................................31 ccm
Idle speed of engine .................. 3100 ∓ 200 min
Max. engine speed...............................9500 min
Max. torque
Scythe: ................................................7200 min
Trimmer: ..............................................6400 min
Ignition .................................................Electronic
Drive ........................................Centrifugal clutch
Weight (with empty tank) ............................6.1 kg
Cutting line diameter ...................................45 cm
Cutting circle diameter of blade ..................23 cm
- 20 -
-1
-1
-1
-1
19.07.2017 09:09:23 19.07.2017 09:09:23