Operation; Recording - EuroLite DMX Scene Setter Bedienanleitung

address every projector to the respective starting address. Otherwise, the channel assignment will not be
correct. All projectors with the same starting address work synchronically.
Projector Starting address
Projector 1 1
Projector 2 17
Projector 7 97
Projector 10 145

6. OPERATION

After you connected the device to the mains, the DMX Scene Setter is ready for use.

Recording

1. RECORD ENABLE
1) Press and hold RECORD KEY.
2) Press FLASH 1 FLASH 5 FLASH 6 FLASH 8 keys in sequence.
3) Release RECORD, the led is lighting, recording is ready.
2. ERASE ALL PROGRAMS
1) Press and hold RECORD KEY.
2) Press FLASH 1 FLASH 3 FLASH 2 FLASH 3 in sequence.
3) Release RECORD
3. CLEAR MEMORY
1) Press RECORD key, and then press REC CLEAR KEY.
2) Release RECORD and REC CLEAR at a time.
4. RECORD PROGRAM
1) Set desired channel and record it.
2) Light the relevant page led.
3) Press RECORD then press appropriate FLASH.
4) Release RECORD.
For example: create a program ,record it in the 28th SCENE.
1) clear memory.
2) light 1-24 SINGLE LED
3) set channel slider 1-24 to min. position and MASTER A to max. position.
4) move slider 1 to max. Position, press RECORD then move it to min. Position. Continue moving other
sliders until all sliders are set.
5) press PAGE key to light page 3 led.
6) press RECORD ,then press FLASH 16.
7) Release RECORD and FLASH 16, the program of 1-24 full on in sequence is recorded in the 28th
SCENE.
5. DELETE A PROGRAM
1) Press PAGE to light the desired PAGE LED.
2) Press RECORD, then press appropriate FLASH twice.
For example: to delete the 40th SCENE program .
1) press PAGE to light page 4 led.
2) press RECORD ,then press FLASH 16 twice.
3) release RECORD.
6. SCENE EDIT ENABLE
1) Press PAGE light desired PAGE led.
2) Press MODE SELECT to light led.
Projector Starting address
Projector 3 33
Projector 4 49
Projector 8 113
Projector 11 161
20
Projector Starting address
Projector 5 65
Projector 6 81
Projector 9 129
Projector 12 177