EuroLite DMX Scene Setter Bedienanleitung Seite 21

3) Press EDIT and desired scene FLASH.
4) Release EDIT and the FLASH, the relevant SCENE LED is lit and others go out. Now editing is enable.
For example : to make the 11th SCENE program enter EDIT mode .
1) press PAGE to light PAGE 1 led.
2) press MODE SELECT to light LED
3) Press EDIT and FLASH 23.
4) Release EDIT and FLASH 23.
7. EXIT EDIT MODE
1) Press RECORD then press EXIT.
2) Release RECORD and EXIT.
8. DELETE STEP
1) In EDIT mode, press STEP to execute the program till the step to be deleted.
2) Press DELETE . The step is deleted and the next step is executed.
9. ADD STEP
1) In EDIT mode .record the step to be inserted.
2) Press STEP to execute the program till the step you want to insert before.
10. MODIFY STEP
1) In EDIT mode. Press STEP to execute the program till the step to be modify.
2) press UP or DOWN and desired FLASH ,the output will show on display, you feel it is ok, release FLASH.
11. CHANGE SHOWING MODE OF DIMMER
Press and hold RECORD, then press 0% or 0-255 KEY.
12. SELECT AND RUN PROGRAM
1) Press MODE SELECT to light CHASE-SCENES LED.
2) Press PAGE to light the desired page led.
3) Move MASTER B slider to max. Position.
4) Move desired scene channel slider to min., then move it up, the program is selected and executed.
13. RUN A PROGRAM WITH REGULAR BEAT
1) Press AUDIO to extinguish AUDIO led.
2) Press PARK to light MIX MODE LED.
3) Select to run the scene program.
4) Move the SPEED slider or press TAP SYNC twice to define beat time.
5) Press REC SPEED and the desired FLASH KEY. Then the program will be executed with the beat time.
14. RUN A PROGRAM WITH SPEED SLIDER.
1) Press AUDIO to extinguish AUDIO led.
2) Press PARK to light MIX MODE led.
3) Select to run the scene program.
4) Move SPEED slider to SHOW MODE position.
5) Press REC SPEED, then press the appropriate FLASH.
For example: run the 14th SCENE program with the speed of 1 steps per second, then set it to be controlled
by speed slider.
1)Press MODE SELECT to light CHASE-SCENES LED.
2)Press AUDIO to extinguish its led.
3)Press PARK to light MIX MODE LED.
4)Move all channel sliders to min. Position.
5)Move MASTER B slider to max. Position.
6)Press PAGE to light PAGE 2 LED.
7)Move the 14th channel slider to max. Position.
8)Move SPEED slider until 1.00 appear in display and SPEED LED is lit.
9)Press REC SPEED and FLASH 14, then release both keys, the 14th SCENE
program is set to run 1 step per second.
10)Move SPEED slider to SHOW MODE position. Press REC SPEED and the 14th
21