EuroLite DMX Scene Setter Bedienanleitung Seite 22

FLASH , then the 14th SCENE program is set to be controlled by SPEED
slider, move SPEED slider until 0.10 appears on display, the 14th program
will run with 10 steps per second.
15.SPEED SETTING
A: SLOWEST SPEED SLIDER SETTING(5 MIN)
1)Press and hold RECORD .
2)Press the 5th FLASH KEY 3 times, then release RECORD.
3)The 5 MIN LED is lit, which means that 5 MIN SPEED slider is done.
B: SLOWEST SPEED SLIDER SETTING(10 MIN)
1)Press and hold RECORD .
2)Press the 10th FLASH KEY 3 times, then release RECORD.
3)The 10 MIN LED is lit, which means that 10 MIN SPEED slider is done
16.MIDI IN SETTING
1)Press and hold RECORD
2)Press 1th FLASH KEY 3 times, then release RECORD, when CHI appears on display, you can select MIDI
IN channel from 1th FLASH to 16th FLASH.
3)After you press desired FLASH, the appropriate channel led is lit.
4)Press RECORD and EXIT to withdraw MIDI IN setting.
17.MIDI OUT SETTING
1)Press and hold RECORD
2)Press 2th FLASH KEY 3 times, then release RECORD, when CHO appears on
display, you can select MIDI IN channel from 1th FLASH to 16th FLASH.
3)After you press desired FLASH, the appropriate channel led is lit.
4)Press RECORD and EXIT to withdraw MIDI OUT setting.
18.RECEIVE FILE DUMP
1)Press and hold RECORD
2)Press 3th FLASH KEY 3 times, then release RECORD, when IN appears on
display, it is ready to receive file dump.
3)All other operations are void when receiving file dump. It will withdraw receiving file dump automatically
when receiving is over or mistakes is occurred. Power on after power off also pause receiving file dump.
19.SEND FILE DUMP
1)Press and hold RECORD
2)Press 4th FLASH KEY 3 times, then release RECORD, when OUT appears on display, it is ready to
receive file dump.
3)All other operations are void when receiving file dump. It will withdraw sending file dump automatically
when sending is over or mistakes is occurred. Power on after power off also pause receiving file dump.
20. DETAILED DESCRIPTION
1)FADE TIME: The period that output varies from full dimmer to zero or from zero dimmer to full dimmer.
2)SINGLE MODE: SCENE program is executed one by one and the N0. is showing on display. Its speed is
controlled by SPEED slider.
3)MIX MODE : All selected program are executed synchronously, each is allowed to have respective chasing
speed.
4) When LED is lit, you can select scene program using
PRESET B channel sliders. BLIND one of PRESET B channels, the appropriate channel slider together with
MASTER A slider control its output, and the maximum dimmer of the program is maintained until you HOME
the channel.
5) FADE TIME & SPEED TIME INDICATIONS
A: when time is more than 1 minute, the indication includes two dots.
For example:1 minute past 15 second, indicate 1.15.
Half past 4 minute, indicate 4.30.
10 minute, indicate 10.0.
B: when time is less than 1 minute, the indication has one dot only.
For example:11.5 second, indicate 11.5
1.2 second , indicate 1.2
0.55 second ,indicate 0.55
6) transmit and receive file
22