CONNECTIONS
Mains input
Plug the power-plug into your safety socket.
The occupation of the power-cord (3 x 1.5 mm²) is as follows.
Brown
Blue
Green/Yellow
The earth has to be connected!
Please note: The circuit breaker restricts the maximum power output to 2300 W.
Outputs
Output is via 8 IEC output sockets. Connect your consumers via the IEC output sockets. The maximum
current per channel is 10 A and the maximum current of 10 A must never be exceeded.
OPERATION
After you connected the device to the mains, the Board 8-S is ready for use. You can switch the desired
channel on and off via the switches on the frontpanel.
CLEANING AND MAINTENANCE
We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no servicable parts inside the device. Maintenance and service operations are only to be carried
out by authorized dealers.
If the fuse interrupts, please reset the breaker.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device will be damaged, it has to be replaced by authorized dealers only in
order to avoid hazards.
If defective, please dispose of the unusable device in accordance with the current legal regulations.
Should you have further questions, please contact your dealer.
TECHNICAL SPECIFICATIONS
Power supply:
Max. power output:
Max. current:
Max. current/channel:
Output sockets:
Dimensions (WxDxH):
Weight:
Please note: Every information is subject to change without prior notice. 22.05.2012 ©
live (L)
neutral (N)
earth (E)
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
230 V AC, 50 Hz ~
2300 W
10 A
10 A
8 IEC output sockets
483 x 105 x 44 mm
1.5 kg
8/8
00070375.DOC, Version 4.0