Operation; Chaser; Stand Alone Operation - EuroLite LED LMCTC Bedienungsanleitung

OPERATION

After you connected the effect to the mains, the EUROLITE LED LMCTC Controller starts running.

Chaser

A chaser is a sequence of different programs that will be called up one after another. With the EUROLITE
LED LMCTC Controller, you can select up to 16 different chasers.
Selecting a chaser
Press the MODE button and select the desired chaser.
Please Note: In order to switch programs, please set the address in DMX mode to 0.
Press the MODE button and select the desired Speed and Flash Frequence parameters.
The desired parameter values can be selected via the UP or DOWN buttons.
Mode Option:
Static Colours
Mode Option:
Colour change
Slow flow 1
Slow flow 2
Roll chase 1
Roll chase 2
Multi-colour
Fast flow 1
Fast flow 2
2 colour chase
2 colour flow
Colour fade
Autorun
System mode
* Please Note: After determining the number of tubes being used, the address must be set once before
taking the system into operation for the first time.

Stand Alone operation

In the Stand Alone mode, the LED LMCTC Controller can be used without DMX-controller.
Downloaded from www.Manualslib.com
Possible Colours
Blackout, red, green, yellow, blue, violet, cyan, white
SET UP Option
Speed
Flash Frequence
Speed
Flash Frequence
Speed
Flash Frequence
Speed
Flash Frequence
Speed
Flash Frequence
Speed
Flash Frequence
Speed
Flash Frequence
Speed
Flash Frequence
Speed
Flash Frequence
Colour Sortation
Speed
Flash Frequence
Colour Sortation
Speed
Flash Frequence
Speed
Flash Frequence
Tube Addressing
Tube Amount:
DMX Addressing
manuals search engine
UP/DOWN
1 -- 100
1 -- 100
1 -- 100
1 -- 100
1 -- 100
1 -- 100
1 -- 100
1 -- 100
1 -- 100
1 -- 100
1 -- 100
1 -- 100
1 -- 100
1 -- 100
1 -- 100
1 -- 100
1 -- 100
1 – 100
1 -- 20
1 -- 100
1 – 100
1 -- 20
1 -- 100
1 -- 100
1 -- 100
1 -- 100
0 – 508 (YES/NO) *
1 – 1000
1 – 508
19/22 5192861A_V_2_0.DOC