Lowenstein Medical LM Flowsensor Neo reusable Gebrauchsanweisung Seite 12

EN
Technical data
Power supply (via flow sensor cable): 5 V DC
Measuring range: 0.1 l/min – 32 l/min
Accuracy: ± 8%
Operating conditions: Temperature 10°C – 40°C; relative humidity
15% – 95%.
Storage/transport conditions: Temperature -20°C – 60°C; relative
humidity 10% – 100%, non condensing.
Spare parts
The following connecting leads are available for connecting the
flow sensor to the respective ventilator:
• 0217012v01 Cable LM Flowsensor Neo, screwable
• 0739001v01 Cable LM Flowsensor Neo, push-pull
Disposal
Used flow sensors can be contaminated. Dispose of the product
according to the regulations and infection control procedures of
your clinic as well as the valid local waste disposal regulations.
Dispose of the flow sensor cable in an environmentally friendly
way as electrical scrap.
12
Symbols
Application part of
type B
(IEC 60417-5840)
See the instructions
for use
Do not use if
the packaging is
damaged
Sterilizable in the
steam sterilizer
(autoclave) at 134 °C
Protect from light
Do not dispose of with
the domestic trash
LM Flowsensor Neo reusable 0217011v01 ─ Instructions for use
Meets the
requirements of the
(EU) directive 2017/45
for medical products
Reference number
Batch no. XXXXX
(XXXXX = consecutive
number)
Manufacturer
Representative in
Switzerland