Removing The Tow Bar (Trailer Mode); Installing The Flag; Stowing The Caster Wheels - Burley Hopper Bedienungs- Und Sicherheitsanleitung

Installing the Tow Bar (Bike Trailer Mode)
B
A
1
While depressing the button, slide
the tow bar into the tow bar receivers
until hole aligns with hole .
A b
Installing the Safety Flag
1
Join pole sections together, insert
the flag pole into the yellow opening
on the rear of the trailer.
10
ASSEMBLY & uSE
2
Insert the retaining pin from the
top through the aligned holes.
Stowing the Caster Wheels (Bike Trailer Mode)
WARNING
do not uSE
trAILEr WItHout
SAFEtY FLAG.
ENG
3
Ensure that the retaining pin is
locked properly as shown above.
1
Press button to release
each caster.
DEU FRA ESP
Removing the Tow Bar
1
remove the retaining pin
and while depressing the
button, remove the tow bar.
2
raise each caster wheel
until it locks into place.
BURLEY.COM