Connection; Overview - Yamaha YHT-S300 Kurzanleitung

CONNECTION

• Do not connect the power cable until all connections are completed.
• Do not use excessive force when inserting the cable plug. Doing so may damage the cable plug and/or
terminal.

Overview

Follow the procedure below to connect the subwoofer integrated receiver and the external components.
Twist and pull off the
insulation tube on the lead
wire.
To AC wall outlet
y
After you have made all connections, connect the power
cable of the subwoofer integrated receiver.
See "Connecting Blu-ray disc player or set-top box".
(☞ P. 5)
y
Connect your speaker as the center speaker of this system to the SPEAKERS
(☞ P. 20 in Owner's Manual)
4
En
Connection
Insert to the terminal of the
correct polarity-positive (+)
to positive (+), and negative
(-) to negative (-).
White
Front Right Speaker Front Left Speaker
See "Connecting a TV". (☞ P. 5)
Indoor FM antenna (supplied)
y
If the radio wave reception is weak in your area
or you want to improve the radio wave reception,
we recommend that you use an outdoor antenna.
For details, consult your nearest authorized
Yamaha dealer or Service Center.
Gray
terminal of the subwoofer integrated receiver.
See "Using optional
equipment" (☞ P. 16)
in Owner's Manual.
VCR, etc.