Storage; Technical Data - P.lindberg Roth Dps-175 Bedienungsanleitung

STORAGE

At the end of the season, it is highly recommended to prepare the mower for winter storage as
soon as possible. Start by carefully cleaning the mower. Dust and dirt absorb moisture and moisture
promotes the formation of rust.
Be careful when cleaning with a pressure washer. Never point the jet directly at the bearings.
Lubricate all lubrication points carefully after cleaning.
Disconnect the PTO shaft, and lubricate it with grease on the profile tubes and in the Cardan joints.
Spray the mower with a layer of rustproofing oil. This is particularly important on all parts polished
from use.
The mower must be stored indoors in a well-ventilated machinery shed to protect the mower
against the elements.

TECHNICAL DATA

Required PTO output
Cut width
Total width
PTO speed
Rotor speed
Three-point linkage
Flails, no.
Flails, type
Gear oil
Oil volume, gearbox
Weight
Dimensions (L x W x H)
P. Lindberg A/S
Tlf: 70212626
PL9044853
Minimum of 40–80 HP
155 cm
170 cm
540 rpm
2.356
Kat. 2
24
Hammer flails, 90 mm, 750 g.
80W-90
1 litre
350 kg
170 x 78 x 95 cm
13
Sdr. Ringvej 1
DK-6600 Vejen
PL9044854
175 cm
190 cm
28
385 kg
190 X 78 X 95 cm
MAN 9044853 EN V5
www.p-lindberg.dk
e-mail: salg@p-lindberg.dk