ASSEMBLY
If in doubt, refer to the exploded-view drawing in the spare-parts catalogue.
Tighten all bolts and screws on the mower, even the components that were attached at the factory.
Thoroughly lubricate the mower's grease nipples.
Remember to fill up the gearbox with gear oil. The gearbox holds 1 litre of 80W-90 gear oil.
When you receive the machine in the rack, first, please install some parts to make it a finished
machine.
Step 1) Remove the packing, double check the mower without defect and missing parts.
5
MAN 9044853 EN V5
P. Lindberg A/S
Sdr. Ringvej 1
www.p-lindberg.dk
Tlf: 70212626
DK-6600 Vejen
e-mail: salg@p-lindberg.dk