Herunterladen Inhalt Inhalt Diese Seite drucken

Yamaha DV-C6860 Bedienungsanleitung Seite 37

Dvd changer
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Problem
No audio at digital output
Disc does not play
Picture freezes momentarily
during playback
This unit does not respond to
the remote control
Buttons do not work
This unit does not respond to
some operating commands
during playback
This unit cannot read CDs/
DVDs
Menu items cannot be selected
Unable to turn on or off a
progressive scan
– Check the digital connections.
– If you are playing a DTS source, check that your receiver can
decode DTS and "DIGITAL OUTPUT" is set to "ALL" (see
page 23).
– If you are playing an MPEG-2 source, check that your
receiver can decode MPEG-2. Otherwise, make sure
"DIGITAL OUTPUT" is set to "PCM ONLY" (see page 23).
– Check if the audio format of the selected audio language
matches your receiver capabilities.
– The DVD+R/RW, DVD-R/RW, CD-R/RW must be
finalized.
– Ensure the disc label is facing up.
– Check if the disc is defective by trying another disc.
– If you have recorded a picture CD or MP3 CD yourself,
ensure that your disc contains at least 10 pictures or 5 MP3
tracks.
– Region code is incorrect (see "Region codes" on page 2).
– Check the disc for fingerprints/scratches and clean it with a
soft cloth wiping from center to edge.
– Aim the remote control directly at the remote control
sensor on the front panel of this unit.
– Reduce the distance of the remote control from this unit.
– Replace the batteries in the remote control.
– Reinsert the batteries with their polarities (+/– signs) as
indicated.
– To completely reset this unit, unplug the AC cord from the
AC outlet for 5-10 seconds.
– Operations may not be permitted by the disc. Refer to the
instructions of the disc jacket.
– Use a commonly available CD/DVD lens cleaner to clean
the lens before sending this unit for repair.
– Press STOP (9) twice on the remote control before
selecting Setup Menu.
– Depending on the disc availability, some menu items cannot
be selected.
– Check that the video signal output is switch to "YUV" (see
"Switching the YUV/RGB" on page 27).
Troubleshooting
Solution
33
En

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis