Herunterladen Inhalt Inhalt Diese Seite drucken

Getting Started; Inserting Batteries Into The Remote Control; Using The Remote Control; Handling The Remote Control - Yamaha DV-C6860 Bedienungsanleitung

Dvd changer
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Getting Started

Step 1: Inserting batteries
into the remote control
3
1
2
2
1 Open the battery compartment.
2 Insert the two supplied batteries (AA, R06,
UM-3) following the indications (+/–)
inside the compartment.
3 Close the cover.
Notes:
– Insert batteries correctly according to the
polarity markings (+/–). The batteries
inserted in the opposite direction may leak.
– Replace the exhausted batteries
immediately with new ones to prevent a
leakage.
– Remove the batteries from the
compartment if the remote control is not
used for more than a month.
– If the batteries have leaked, dispose of
them immediately. Avoid touching the
leaked material or letting it come into
contact with clothing, etc. Clean the battery
compartment thoroughly before installing
new batteries.
– Do not use old batteries together with new
ones.
– Do not use different types of batteries (such
as alkaline and manganese batteries)
together. Read the packaging carefully as
these different types of batteries may have
the same shape and color.
– Dispose of the batteries correctly in
accordance with your local regulations.
8
En

Using the remote control

Point the remote control at
the remote control sensor,
within approximately 6 m
(20 ft) from the unit.

Handling the remote control

• Do not spill water or other liquids on
the remote control.
• Do not drop the remote control.
• Do not leave or store the remote
control in the following types of
conditions:
– places of high humidity, such as near a
bath
– places of high temperature, such as near
a heater or stove
– places of extremely low temperatures
– dusty places
Remote control
sensor

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis