Zooming In; Resuming Playback From The Last Stopped Point; On-Screen Display (Osd) - Yamaha DV-C6860 Bedienungsanleitung

Zooming in

This function allows you to enlarge or
lessen the picture on the TV screen and
pan through the enlarged picture.
1 During playback, press ZOOM repeatedly
to display the picture at different scales.
• Use
1 / 2/3 / 4
enlarged picture.
Playback continues.
2 Press ZOOM repeatedly to return to the
original size.
Resuming playback from the last
stopped point
You can resume playback of the last 10
discs, even if the discs were ejected or the
power of this unit was turned off.
1 Load one of the last 10 discs.
"LOADING #" (#: the disc tray number
(1-5)) appears on the TV screen.
2 Press PLAY (B) while "LOADING #" is
displayed on the TV screen.
"RESUME PLAY" appears on the TV
screen and the disc is played back from
the last point.
To cancel the resume mode
• When playback is stopped, press
STOP (9) again.
TIPS: The operating features described here might not be possible for certain discs.
Always refer to the instructions supplied with the disc.
to pan through the
Disc Operations

On-screen display (OSD)

The OSD menu shows disc playback
information (e.g., the title or chapter
number, elapsed playing time or audio/
subtitle language). A number of operations
are possible without interrupting disc
playback.
1 During playback, press ON SCREEN.
A list of available disc information
appears on the TV screen.
DVD
MENU
TITLE
CHAPTER
AUDIO
SUBTITLE
BITRATE 16
VCD/SVCD
MENU
TRACK
DISC TIME
TRACK TIME
REPEAT
BITRATE 16
2 Press 3 / 4 to view the information, and
then press ENTER/OK to access the
selected item.
3 Use the numeric buttons (0-9) to input
the number/time or press 3 / 4 to make a
selection, and then press ENTER/OK to
confirm the selection.
Playback changes to the selected time
or to the selected title/chapter/track.
02/14
02/14
5.1CH
ENG
TITLE ELAPSED 0:02:25
02/14
0:49:17
0:03:43
OFF
TOTAL ELAPSED 0:02:25
15
En