Rotwild R.EX Schnellstartanleitung Seite 19

You can connect your bike with the DJI Avinox app.
When you switch on your bike for the first time, simply follow the instructions on the
display to pair and activate it.
If you want to ride without activation first, tap "Skip" – this allows you to use the bike in
test mode.
After the test ride, the bike must be paired and activated before you can continue riding.
1. Press and hold the power button on the display to turn on the bike.
2. Swipe up on the display, open the settings, and tap "Pair with App"
to display the QR code.
3. Make sure Bluetooth and internet are enabled on your smart-
phone. Open the Avinox app, tap "Pair" and scan the QR code.
Once the drive system is paired with the Avinox app via Bluetooth, you
can customize the support levels and the display settings.
You can also activate the anti-theft protection via the app.
After inserting a SIM card into the control unit, you can even control
your bike remotely via the app.
Quickstart Guide 18
App Store
Google Play Store