VEVOR RP7426 Originalanleitung Seite 7

• Keep proper footing at all times in order to ensure correct balance.
• Do not wear watches, rings, bracelets, or loose clothing when using any air
tool.
• For optimal safety and tool performance, inspect the tool daily in order to
ensure free movement of the trigger, safety mechanisms, and springs.
• Keep the work area clean. A cluttered or dirty workbench may lead to an
accident. Floors should be kept clear.
• This tool is not a toy. Use it with caution.
• Use the tool in a well-ventilated area.
• Verity that the tool has stopped before putting it down after use.
• Handling and storage of oil: Use with adequate ventilation. Avoid contact of oil
with eyes, skin and clothing. Avoid breathing spray or mist. Store in a tightly closed
container in a cool, dry, well-ventilated area free from incompatible substances.
• Do not use the tool near or below freezing temperatures, as doing so may
cause tool failure.
• Do not store the tool in a freezing environment to prevent ice formation on the
operating valves of the tool, as doing may cause tool failure.
• Disconnect the tool from the air supply and turn off the
compressor before changing any accessories, performing
any maintenance, servicing, when the tool is not in use,
when it is being handed to another person, and when it is
left unattended. Failure to comply may result in moderate
injury or damage to equipment.
• Use safety goggles and ear protection: Wear safety
glasses with side shields when operating the
tool/compressor and verify that others in the work area are
also wearing safety glass.requirements and must provide
protection from flying particles from the front and the sides.
Air-powered tools are loud and the sound can cause
hearing damage. Always wear ear protection to help prevent hearing damage and
loss. Failure to comply may result in moderate injury.
Note: Recycle unwanted materials rather than disposing of it as waste. Sort the
tools, hoses, and package in specific categories and take them to the local
recycling center or dispose of them in an environmentally safe way.