VEVOR RP7426 Originalanleitung Seite 12

WARNING!
Potential hazard that will result in serious injury or loss of life.
Disconnect the tool from the air supply before changing accessories,

servicing, or performing maintenance.
Only use the tool after replacing or repairing the damaged parts or

accessories.
Use only recommended and properly rated replacement parts and

accessories. Failure to comply will lead to serious injury or loss of life.
Repairs must be performed by a qualified service technician.

Maintenance
required
General
inspection-free
movement
In-depth
inspection
Replace worn
or broken parts
Lubrication
Lubrication: If the Air-powered impact wrench and the

compressor are not equipped with an inline lubrication
system, place up to 6 drops of pneumatic tool oil into
the air inlet before each work day or after every 2 hours
of continuous use, depending on the characteristics of
work piece.
MAINTENANCE
Description
Trigger, spring,
safety mechanism
Worn or broken
parts
See below
Maximum service interval
Tools or
materials
Each use or
required
every 2 hrs
None
Pneumatic
tool oil
As
Monthly
needed