VEVOR RP7426 Originalanleitung Seite 5

• Keep children away from the work area. Do not allow children to handle power
tools.
• Do not use a tool that is leaking air, that has missing or damaged parts, or that
requires repairs. Verify that all screws are securely tightened.
• Never attempt to override tool safety features.
• Do not allow unskilled or untrained individuals to operate Air-powered impact
wrench or any other air-powered tools.
• Do not use oxygen or any other combustible or bottled gas
to power air powered tools. Failure to observe this warning
can cause explosion and serious personal injury or death.
Use only the compressed air to power air-powered tools, Use
a minimum of 25' (7.6m) of hose to connect the tool to the
compressor. Failure to comply will result in serious injury or
loss of life.
• Risk of electric shock: Do not expose a compressor to rain. Store it indoors.
Compressor must be grounded. Do not use grounding adaptors.
• Risk of personal injury: Do not direct compressed air from the air hose toward the
user or other personnel.
• Risk of inhalation: Never directly inhale the air produced by the compressor.
•Risk of bursting: Do not adjust the pressure switch or safety valve for any reason.
They have been preset at the factory for this compressor's maximum pressure.
Tampering with the pressure switch or the safety valve may cause personal injury
or property damage.
•Risk of burns: The pump and the manifold generate high
temperatures. In order to avoid burns or other injuries, do
not touch the pump, the manifold, or the transfer tube while
the compressor is running. Allow the parts to cool down
before handling or servicing. Keep children away from the
compressor at all times.
• Risk of bursting: Make sure the regulator is adjusted so
that the compressor outlet pressure is set lower than the maximum operating
pressure of the tool. Before starting the compressor, pull the ring on the safety
valve to make sure the valve moves freely. Drain water from tank after each use.
Do not weld or repair tank. Relieve all pressure in the hose before removing or