Initial Start-Up - Kärcher Rvm 4 Comfort Bedienungsanleitung

LED buttons
Red breathing or flash
LED buttons
Off
Lights up blue
Blue breathing
Flashes red
Special modes
Sleep mode
The cleaning robot automatically switches to sleep
mode after 5 minutes of inactivity. Press any button to
wake it up.
● The cleaning robot does not switch to sleep mode
when it is on the charging station.
● The cleaning robot switches off automatically if it is
in sleep mode for more than 6 hours
"Do not disturb" mode
It is possible to activate the "Do not disturb" mode. In
"Do not disturb" mode, the cleaning robot does not emit
any acoustic warnings. The LED lights are switched off.
"Do not disturb" mode can be activated in the App.
Downloading the App is described in the chapter Con-
necting cleaning robots with WLAN and App.
Note
In "Do not disturb" mode, the cleaning robot is not
switched off. To continue cleaning, briefly press On/Off/
Pause button.
Remote control
In the app, there is the option to navigate the robot if it
gets stuck in an inaccessible place, for example.
This remote control can be selected in the app under
"APP settings" > "Feature settings" > "More features".

Initial start-up

Setting up the charging station
● Select the location so that the cleaning robot can
easily reach the charging station.
ATTENTION
Risk of damaging the floor due to moisture
The wet wiping mop can damage the floor during charg-
ing.
Position the charging station on a water-resistant floor.
● Ensure a distance of at least 0.5 m to the left and
right of the charging station and a distance of at
least 1.5 m in front of the charging station.
● The location must not be exposed to direct sunlight.
1. Set up the charging station.
Illustration C
2. Plug the device plug of the power cable into the
charging socket on the charging station.
Illustration D
3. Connect the mains plug.
Connecting the cleaning robot with the
Meaning
A malfunction has occurred. Troubleshooting see Troubleshooting guide.
LED colours on the charging station
Meaning
The device is fully charged and in sleep mode.
The device is in "Do not disturb" mode.
Power off.
Maintenance running.
The device is fully charged.
The device is charging.
A malfunction has occurred. Troubleshooting see Troubleshooting guide.
English
charging station
1. Place the cleaning robot manually on the charging
station and make sure that the battery terminals
have a good contact.
The cleaning robot switches on automatically. The
LED buttons light up.
Connecting cleaning robots with WLAN and
The cleaning robot can be operated directly via buttons
on the device or via an App using a WLAN-enabled mo-
bile device. To be able to use all available functions we
recommended controlling the cleaning robot via the
KÄRCHER Indoor Robots App.
Before you download the app, make sure you have the
following:
● The mobile device is connected to the Internet.
● The 2.4 GHz WLAN of the router is activated.
● Sufficient WLAN coverage is guaranteed.
Download the KÄRCHER Indoor Robots App from the
®
Apple App Store or from the Google Play™ store.
● Google Play™ and Android™ are trademarks or
registered trademarks of Google Inc.
®
● Apple and App Store
tered trademarks of Apple Inc.
Connecting cleaning robots with WLAN and
KÄRCHER Indoor Robots App:
1. Download the KÄRCHER Indoor Robots App from
the Apple App Store or from the Google Play Store.
2. Open the KÄRCHER Indoor Robots App.
3. Create an account (if you are not already regis-
tered).
4. Add the desired cleaning robot.
5. Follow the step-by-step instructions in the App.
Deactivating cleaning robots with WLAN
1. Delete the device on APP.
App
®
are trademarks or regis-
17