VEVOR RF6000AG Bedienungsanleitung Seite 5

• Avoid inhaling dust or handling debris from work processes which can be harmful
to your health.
• Operators and maintenance personnel must be physically able to handle the bulk,
weight and power of this tool.
• This tool is not intended for use in explosive atmospheres and is not insulated for
contact with electric power sources.
• Solvent and coatings can be highly flammable or combustible,
especially when sprayed.Adequate exhaust must be provided to keep
air free of accumulations of flammable vapors.
• Smoking must never be allowed in the spray area.
• Fire extinguishing equipment must be present in the spray area.
• Never spray near sources of ignition such as pilot lights,
welders, etc.
• Halogenated hydrocarbon solvents - for example, methylene chloride - are not
chemically compatible with the aluminum that might be used in many system
components. The chemical reaction caused by these solvents reacting with
aluminum can become violent and lead to an equipment explosion. Guns with
stainless steel fluid passages may be used with these solvents. However,
aluminum is widely used in other spray application equipment - such as material
pumps, cups and regulators,
valves, etc. Check all other equipment items before use and make sure they can
also be used safely with these solvents.
Read the label or data sheet for the material you intend to spray. If in doubt as to
whether or not a coating or cleaning material is compatible, contact your material
supplier.
• Sprayed materials may be harmful if inhaled,or if there is contact with
the skin. Adequate exhaust must be provided to keep the air free of
accumulations of toxic materials. Use a mask or respirator whenever
there is a chance of inhaling sprayed materials. The mask must be compatible with
the material being sprayed and its concentration.
- 4 -