VEVOR RF6000AG Bedienungsanleitung Seite 14

Connect the air source hose to the gun. Make sure the air pressure is

not exceed 36psi(2.5bar)
Pull the trigger slowly and move the Spray gun in parallel strokes to the object

being painted. Keeps the distance from the object being painted at 6" to 12".
This may slightly differ depending on the flow adjustment and the material
being sprayed.
Release the trigger after each forward movement; pull the trigger again on the

return movement.
When using a vertical pattern, move the spray gun in a horizontal motion; with

a horizontal pattern move the spray gun in a vertical motion. A round pattern
requires to greater distance from the object being pointed.
OPERATION
- 13 -