VEVOR RF6000AG Bedienungsanleitung Seite 4

• During cleaning and flushing, solvents can be forcefully expelled from fluid and
air passages. Some solvents can cause eye injury.
• Be sure all in the area are wearing impact-resistant eye and face protection.
• Even small projectiles can injure eyes and cause blindness. High
sound levels can cause permanent hearing loss. Protect yourself from
noise.Noise levels vary with work surface. Wear ear protection.
• Repetitive work motions, awkward positions and exposure to
vibration can be harmful to hands and arms.
• Air under pressure can cause severe injury. Always shut off air supply, drain hose
of air pressure and disconnect tool from air supply when not in use, before
changing accessories or when making repairs. Never direct air at yourself or
anyone else. Whipping hoses can cause serious injury. Always check for damaged
or loose hoses and fittings. Never use quick
change couplings at tool. They add weight and could fail due to vibration. Instead,
add a hose whip and connect coupling between air supply
and hose whip, or between hose whip and leader hose.
• Always use tool at a safe distance from other people in work area.
• Maintain tools with care. Keep tools clean and oiled for best and safest
performance. Follow instructions for lubricating and changing accessories. Wiping
or cleaning rags and other flammable waste materials must be placed in a tightly
closed metal container and disposed of later in the proper fashion.
• Do not wear loose or ill-fitting clothing; remove watches and rings.
• Do not over reach. Keep proper footing and balance at all times. Slipping, tripping
and falling can be a major cause of serious injury or death. Be aware of excess
hose left on the walking or work surface.
• Do not force tool. It will do the job better and safer at the rate for which it was
designed.
• Do not abuse hoses or connectors. Never carry tool by the hose or yank hose to
disconnect from air supply. Keep hoses from heat, oil and
sharp edges. Check hoses for weak or worn condition before each use, making
certain that all connections are secure.
• When possible, secure work with clamps or vise so both hands
are free to operate tool.
- 3 -