Parkside PFSA 20-Li B2 Bedienungs- Und Sicherheitshinweise Originalbetriebsanleitung Seite 35

Personal safety
1) Stay alert, watch what you are
doing and use common sense
when operating a power tool. Do
not use a power tool while you
a ti d o nd
drugs, alcohol or medication. A
moment of inattention while
operating power tools may result in
serious personal injury.
2) Use personal protective
i nt Alwa s w a
protection. Protective equipment
such as dust mask, non-skid
safety shoes, hard hat, or hearing
protection used for appropriate
conditions will reduce personal
injuries.
3) Prevent unintentional starting.
Ens t swit
position before connecting to
power source and/or battery
pack, picking up or carrying the
tool. Carrying power tools with your
finger on the switch or energising
power tools that have the switch on
invites accidents.
4) Remove any adjusting key or
wrench before turning the power
tool on. A wrench or a key left
attached to a rotating part of the
power tool may result in personal
injury.
5) Do not overreach. Keep proper
footing and balance at all
times. This enables better control
of the power tool in unexpected
situations.
6) Dress properly. Do not wear loose
clothing or jewellery. Keep your
hair, clothing and gloves away
from moving parts. Loose clothes
jewellery or long hair can be caught
in moving parts.
7) If devices are provided for the
connection of dust extraction
and collection facilities, ensure
these are connected and properly
used. The use of dust collection can
reduce dust-related hazards.
34 GB/IE
t in n o
is in t o
8) Do not let familiarity gained from
nt s o tools allow o to
become complacent and ignore
tool safety principles. A careless
action can cause severe injury within
a fraction of a second.
Power tool use and care
1) Do not force the power tool. Use
the correct power tool for your
application. The correct power tool
will do the job better and safer at the
rate for which it was designed.
2) Do not use the power tool if the
switch does not turn it on and
o Any power tool that cannot
be controlled with the switch is
dangerous and must be repaired.
3) Disconnect the plug from the
power source and/or a removable
battery pack from the power tool
before making any adjustments,
changing accessories, or storing
power tools. Such preventive safety
measures reduce the risk of starting
the power tool accidentally.
4) Store idle power tools out of
the reach of children and do not
allow persons unfamiliar with the
power tool or these instructions
to operate the power tool. Power
tools are dangerous in the hands of
untrained users.
5) Maintain power tools and
accessories. Check for
misalignment or binding of
moving parts, breakage of parts
and any other condition that may
a t t ow
If damaged, have the power
tool repaired before use. Many
accidents are caused by poorly
maintained power tools.
6) Keep cutting tools sharp and
clean. Properly maintained cutting
tools with sharp cutting edges are
less likely to bind and are easier to
control.
tool s o ation