Before First Use; Operation - Silvercrest Stk 650 A2 Bedienungsanleitung

Before first use
■ Remove all packaging materials from the appliance.
■ Rinse out all parts of the brewing system (brewing chamber
q
, sieve
Before first use, proceed as follows:
1) Remove the jug
2) Fill the jug
lemon juice concentrate). If you have no lemon, you can add a teabag (or
a teaspoon of loose leaf tea) directly to the water.
3) Insert the brewing system into the jug
4) Close the lid
5) Switch the appliance on with the On/Off switch
and the On/Off switch
6) Switch off the appliance using the On/Off switch
ance as described in "Cleaning and care".
The tea maker is now ready for use.

Operation

CAUTION! PROPERTY DAMAGE!
► Do not add any sugar to the tea maker. Do not heat any milk or alcohol in
the tea maker. This will irreparably damage the appliance.
NOTE
► Green tea is not suitable for brewing in the tea maker. The ideal brewing
temperature for green tea is around 70°C. At higher brewing temperatures,
such as those used by the tea maker, tannins are released. This makes the
tea taste bitter.
1) Remove the jug
2) Open the lid
on a level system.
3) Add the required amount of water to the jug
than the MAX marking or less than the MIN marking.
DANGER! ELECTRIC SHOCK!
► To prevent scalds and electric shocks, ensure that the water in the jug
never overflows.
■ 18
│
GB│IE
w 3
) and the jug carefully (see section "Cleaning and care").
3
from the base
3
up to the MAX mark and add a teaspoon of lemon juice (or
1
and place the jug
8
light up. Wait until the control lamp
3
from the base
1
and remove the brewing system. Place the brewing system
5
.
3
.
3 5
on the base .
8
. The control lamp
8
and clean the appli-
5
.
3
. Never fill water to more
0
, riser pipe
4
4
goes off.
3
STK 650 A2