Intended Use; Technical Data - EINHELL GE-CM 36 Li Originalbetriebsanleitung

Anleitung_GE_CM_36_Li_SPK7__ 19.12.12 13:15 Seite 22
GB

4. Intended use

The lawn mower is intended for private use i.e. for use
in home and gardening environments.
Private use of the lawn mower refers an annual
operating time generally not exceeding that of 50
hours, during which time the equipment is primarily
used to maintain small-scale, residential lawns and
home/hobby gardens. Public facilities, sporting halls,
and agricultural/forestry applications are excluded.
Important. Due to the high risk of bodily injury to the
user, the lawn mower may not be used to trim bushes,
hedges or shrubs, to cut scaling vegetation, planted
roofs, or balcony-grown grass, to clean (suck up) dirt
and debris off walkways, or to chop up tree or hedge
clippings. Moreover, the lawn mower may not be used
as a power cultivator to level out high areas such as
molehills.
For safety reasons, the lawn mower may not be used
as a drive unit for other work tools or toolkits of any
kind, unless they have been expressly permitted by
the manufacturer.
The equipment is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user/operator and not the manufacturer
will be liable for any damage or injuries of any kind
caused as a result of this.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
equipment is used in commercial, trade or industrial
businesses or for equivalent purposes.
22

5. Technical data

Idling speed:
Protection class:
Weight:
Cutting width:
Volume of catch bag:
L sound pressure level
pA
K uncertainty
pA
L sound power level
WA
Vibration at the handlebar:
K uncertainty:
Cutting height adjustment:
Protection type:
2x Lithium-ion battery
Voltage:
Capacity:
2x Battery charger
Input voltage:
Output voltage:
Output current:
Protection class:
Sound and vibration values were measured in
accordance with the standards EN ISO 3744:1995,
EN ISO 11201:1995 and EN ISO 20643:2005.
Reduce noise generation and vibration to a
minimum!
Use only equipment that is in perfect condition.
n
Maintain and clean the equipment regularly.
n
Adopt your way of working to the equipment.
n
Do not overload the equipment.
n
Have the equipment checked if necessary.
n
Switch off the equipment when not in use.
n
Wear gloves.
n
3,000 min -1
III
16.9 kg
36 cm
40 liters
79.1 dB(A)
3 dB(A)
93 dB(A)
≤ 2.5 m/s 2
1.5 m/s 2
25-75 mm; 6 levels
IPX1
18 V DC
3.0 Ah
230 V ~
21 V DC
3.0 A
II / ®