Intended Use; Technical Data - EINHELL GH-PM 51 S HW-E Originalbetriebsanleitung

3. Intended use

The equipment may only be used for the tasks it
is designed to handle. Any other use is deemed
to be a case of misuse. The user/operator and not
the manufacturer will be liable for any damage or
injuries of any kind caused as a result of this.
The petrol lawn mower is intended for private use
i.e. for use in home and gardening environments.
Private use of the lawn mower refers an annual
operating time generally not exceeding that of
50 hours, during which time the machine is pri-
marily used to maintain small-scale, residential
lawns and home/hobby gardens. Public facilities,
sporting halls, and agricultural/forestry applica-
tions are excluded.
The charger is designed for charging mainte-
nance-free 12V starter batteries.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
equipment is used in commercial, trade or indust-
rial businesses or for equivalent purposes.
The operating instructions as supplied by the ma-
nufacturer must be kept and referred to in order
to ensure that the lawn mower is properly used
and maintained. The instructions contain valuable
information on operating, maintenance and servi-
cing conditions.
Important. Due to the high risk of bodily injury
to the user, the petrol lawn mower must not be
used to carry out the following work: Trim bushes,
hedges or shrubs, to cut scaling vegetation, plan-
ted roofs, or balcony-grown grass, to clean (suck
up) dirt and debris off walkways, or to chop up
tree or hedge clippings. Moreover, the lawn mo-
wer may not be used as a power cultivator to level
out high areas such as molehills.
For safety reasons, the lawn mower may not be
used as a drive unit for other work tools or toolkits
of any kind.
Anl_GH_PM_51_S_HW_E_D_GB.indb 32 Anl_GH_PM_51_S_HW_E_D_GB.indb 32
GB

4. Technical data

Engine type ........One-cylinder four-stroke engine,
.......................................................163 cc/2.5 kW
Working speed n : ...................... 2800 ± 100 min
0
Fuel: ............................................................ Petrol
Tank capacity: .................................. approx. 1,5 l
Engine oil: ........................... approx. 0.5 l / 10W30
Spark plug: ................................................ F6RTC
Electrode gap (spark plug): ........... 0.7 ± 0,08 mm
Cutting height adjustment: ... Central, (25-85 mm)
Cutting width: .......................................... 510 mm
Weight: .........................................................48 kg
Battery charger
Mains voltage: ..................... 100-240V ~ 50/60Hz
Nominal output voltage: ....................... 14.5 V DC
Nominal output current: ............................... 0.8 A
Battery capacity: .......................................... 7 Ah
Protection class:............................................II /
Battery voltage: ............................................. 12V
Sound and vibration
L sound pressure level ........................ 90 dB(A)
pA
K uncertainty ............................................. 3 dB
pA
L sound power level .......................... 98 dB(A)
WA
K uncertainty .......................................... 1.8 dB
WA
Wear ear-muff s.
The impact of noise can cause damage to hea-
ring.
Vibration emission value a
K uncertainty = 2.4 m/s
- 32 -
-1
= 5.9 m/s
2
h
2
02.02.15 08:30 02.02.15 08:30