Lorelli INFINITY Bedienungsanleitung Seite 14

16. WARNING! If the chair is not provided with a textile cover, keep it away from sunlight, otherwise
hot for the child's skin. If the vehicle has been left in the sun for a long time, check the seat cover and make sure it
is not too hot before placing the child in the child cushion.
17. WARNING! Do not use the car seat in the house. It is not designed for home use and should only be used in
the vehicle!
18. WARNING! Periodically
protections and regulating
traveling.
19. WARNING: ALWAYS secure your child with the safety belts when using the car seat.
20. WARNING! Do not leave the buckle in a partially closed position and it must only lock when all parts are
engaged. It must be possible to release the child from the restraint immediately in an emergency. Your child
must be taught never to play with the buckle. The buckle is NOT CHILD PROOF.
21. WARNING! The baby seat must be secured with car safety belt, even when it is not in use.
An unsecured seat may injure other passengers
22. WARNING! Store this child seat in a safe place when it is not being used. Avoid placing heavy objects on top
of it. Do not allow your child seat to come into contact with corrosive substances
23. WARNING! Do not leave your child in this safety seat for a long period of time. By long trips
make more breaks and take out the child from the safety seat.
24. WARNING! Security
these instructions.
25. WARNING! The instruction
26. Images on the title page and in the instruction manual are only illustrative and may differ from the real
product.
WASHING INSTRUCTIONS
I. The car seat can be cleaned using lukewarm water and soap. Do not use aggressive
or thinner.
2. The cover should be washed by hand at a maximum temperature of 300C. Do not put in the dryer, just airing it.
3. The plastic parts can be cleaned by using a wettish drapery. Please, do not use any solvate.
TYPES OF APPROVED
A - Car safety belt - Diagonal
B - Car safety belt - Lap Belt
Your child seat can be installed ONLY with the help of 3-point
belts!!! ONLY in the OPPOSITE
? Possibility to install ONLY on seats with 3-point seat belts!
CAN NOT BE USED FOR SEATS with 2-point
Parts
Picture 1
1. Carrying handle
2. Belt softener
3. Belt buckles
4. Button for adjusting
5. Strap for belts adjustment
6. Baby Insert
7. Shoulder straps
Check the height of the shoulder straps.
Always check that the shoulder straps are placed at the correct height for your child. Choose the height of the
straps depending on the height of the child, they must be positioned at the level of the child's shoulders or
slightly above.
Attention: Do not place the straps too high or so that the child is leaning on them!
There are pairs of holes on the back of the seat which you can use to adjust the height of the shoulder straps to
the weight of the child. (Figure 4)
check the belts for wear, paying special attention
devices. If the harness / vehicles
is only guaranteed
must be retained
BELTS TO HAVE
Belt
direction
the belt (under the cover)
belts becomes
in the car in an urgent stop.
if the child restraint
on the child restraint
IN THE CAR
of movement of the car!
belt!
8. Buckle Pads
9. Canopy
10. Red button for handle adjusting
11. Diagonal belt guide
12. Lap belt guide
13. Shell
14. Adaptors
15. Openings
16. Cover
14
to the points of attachment,
cut or frayed,
e.g. battery acid.
is fitted in accordance
for its life period
cleaners like abrasives
x
for shoulder straps
it may be too
replace it before
with
ECE R44/04
o
x