General Rules Of Security; Product Specific Rules Of Security - Holzmann MTY 8-70 Originalbetriebsanleitung

Use proper safety clothing and devices when operating the machine (, safety
goggles, ear protectors, safety shoes ...)! Do not wear safety gloves for oper-
ating because they decrease the working accuracy and they might be pulled
into the saw blade.
Before any maintenance you have to disconnect the panel saw from the
power source. Never use the plugged cable for transporting or manipulating
the machine.

10.4 General rules of security

Keep the workshop clean: It's easy to cause accidents if the workshop is in mess.

Don't allow strangers and children to be close to the workshops:

Keep tools carefully: Unused tools should be kept in dry and high places where children's

hands couldn't reach to, please lock them if it's necessary.
 Be careful to choose tools: Don't use small tools or accessories to finish burdensome jobs.
Maintain tools very carefully: Keep cleaning in order to make them perform fully.

Keep vigilance: Keep your brain sober when working. Don't operate dynamoelectric tools

when feeling tired.
Check broken parts and accessories: Operators should carefully check whether every part,

every accessory or every protecting equipment has been broken before intermittently us-
ing tools in order to decide whether such objects perform again.
Advise: It's easy to cause broken tools, even personal hurt if you don't use accessories

from original Company.

10.5 Product specific rules of security

Read the operation manual before operating this machine.

The machine should be disconnected from the power source before performing mainte-

nance or adjustments to the internal mechanisms, or when making repairs.
Before leaving the machine, make sure the work area is clean.

Check timber for loose knots, nails, or other items which may cause a hazard or affect the

machine's performance.
Keep all guards in place and in working order.

Do not force the machine. It will do the job better and be safer working at the rate for

which it was designed.
All children and visitors should be kept a safe distance from the working area.

 The operator should keep proper footing and balance at all times.
Do not operate the machine while under the influence of drugs, alcohol, or any other

medication.
Avoid awkward operations and hand positions where a sudden slip could cause your hand

to move into the sanding drum.
Never leave the machine until it comes to a complete stop, and never leave the machine

running unattended.
The employer is responsible for selecting competent and qualified employees.

Safety shoes should be worn to provide protection against rolling objects, falling objects,

and sharp edges in the workplace.
Eye protection should be worn and such devices should be carefully selected, fitted and

used. Compulsory wearing of glasses with impact resistant lenses and side shields is a
good safety policy.
Wear hearing protection when operating the machine.

Do not wear rings, necklaces or jewelry around moving machinery.

HOLZMANN Maschinen Austria  www.holzmann-maschinen.at
Kreissägeblattschärfmaschine/ circular saw blade grinder MTY 8-70
SAFETY GUIDELINES
Seite 15