Technical Specifications
Electrical Rating
Volts: 240 V, 50 Hz
Watts: 1800-2000 W
Wiring: Plug-In
NOTE: A 10 Amp, 240 Volt circuit is required. A dedicated circuit is preferred, but not essential in all cases. A
dedicated circuit will be required if, after installation, the circuit breaker trips or the fuse blows on a regular basis
when the heater is operating. Additional appliances on the same circuit may exceed the current rating of the
circuit breaker.
WARNING: Electrical outlet wiring must comply with local building codes and other applicable regulations to
reduce the risk of fire, electric shock, or injury to persons.
Product Dimensions
Weight: 15.75 kg
4
Bulb Type: LED
Operating Temperature Range: -20 to 40°C
Approvals certified to meet IEC Standards
620 mm
660 mm
390 mm
www.dimplexfires.com