Technical Specifications; Technical Information; Product Dimensions - Dimplex Ignite Ultra Ult40-Eu Installations- Und Bedienungsanleitung

Technical Specifications

Electrical Requirements
WARNING: Construction and wiring must comply with local building codes and other applicable regulations to
reduce the risk of fire, electric shock and injury to persons.
WARNING: To reduce the risk of fire, electric shock or injury to persons, always use a licensed electrician.
!
NOTE: A dedicated, properly fused 13 Amp circuit is required, rated for the appropriate voltage (230-240V). An
isolation switch should also be incorporated in cases where the product plug is inaccessible after installation.

Technical Information

Rating : 230-240V~50Hz
Heat Output
Nominal Heat Output
Minimum Heat Output
Maximum Continous Heat Output
Auxiliary Electricity Consumption
In Standby Mode

Product Dimensions

151 mm 151 mm
82 mm 82 mm
Model A
ULT40-EU 1031 mm
ULT50-EU 1285 mm
ULT60-EU 1539 mm
ULT74-EU 1895 mm
ULT88-EU 2250 mm
6
230V
P 1.8 -
Nom
P 0.9 -
min
P 1.8 -
max,c
el 0.5 -
SB
A
Open-sided install
240V
1.9 kW
0.9 kW
1.9 kW
0.5 W
457 mm 457 mm
45 mm 45 mm
369 mm
699 mm
238 mm
131 mm
89 mm 89 mm
Dimplex