Round Parts With Sanding Disc; End Sanding And Mitre Sanding With Sanding Disc; Dustextraction - Holzmann BT 46 Betriebsanleitung

OPERATION

14.3.5 Round parts with sanding disc

For sanding round parts, hold the workpiece firmly with both hands and exert slight pressure only
on the left, down running side (otherwise there is a risk of thrown workpieces) of the sanding disc
(fig.p).

14.3.6 End sanding and mitre sanding with sanding disc

For end sanding and mitre sanding use the mitre auger (fig.q.) and work like the capture before.

14.3.7 Dustextraction

The connecting stub (60mm Ø) for the dustextration is on the left side below the table.
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at 32
BT 46