Error - Quick Tools Qutv2 Bedienungsanleitung

<1Ω between 1
and 4
After changing the heating insert, the temperature should be calibrated!

2.9. Error

--- Desoldering tool not connected
S-E Sensor is faulty
H-E Heater insert is defective or not installed
We wish you much joy and success in using your QUICK DESOLDERING STATION
and are happy to receive your suggestions for improvements.
You can also contact us if you have any problems or questions about your
application.
Your team at Bräunlich GmbH
<10Ω between 2 and 3
<12Ω between 7
and tip
11
USER MANUAL