Error Messages; Replacing The Heating Element - Quick Tools Qu969B+ Bedienungsanleitung

• When using for the first time, a temperature of 250 to 280°C should be
selected and the tip should be wetted with fresh solder.
• Always select the soldering tip to suit the size of the solder joint.
• Before placing the soldering iron in the storage stand, the tip must
always be wetted with fresh solder.
• The cleaning sponge must not be wet, only damp. Oxidation on the tip
must not be ground off. A brass brush or brass wool is recommended
for cleaning.
• If the tip no longer accepts solder, it can be "cleaned" with a reactivator
at low temperatures.
• Do not use force when soldering.
• Recommended soldering tip temperature: 320 - 380°C.

2.8. Error Messages

S-E Sensor error
H-E Heating element error

2.9. Replacing the heating element

Before disassembly, the soldering iron must cool down to room temperature
and the mains plug must be disconnected.
NOTE: Do not use metal tools to remove the tip or tip holder from the handle
1. remove soldering tip and unscrew⑤knurled nut
2. Pull ⑥ heating element out of the ⑪ handle
3. remove ⑩ cable clip from the ⑨ plastic part
Changing the heating element
7
USER MANUAL