Quick Tools QUTV2 Bedienungsanleitung Seite 27

2.8.2 Filter
1. Switch off the soldering station and allow to
cool.
2. Pull the closure backwards.
3. Remove the residual solder container.
4. Change the ceramic filter when it is worn out (hardened).
Solder
collector
2.8.3 Changing the Heating Insert
Turn off the soldering station and allow to cool to room temperature. Unplug
the power cord.
1. Unscrew 1 and 2
2. 3 take from
3. Remove 4 (3 screws)
4. 5 subtract
After changing the heating insert, carry out the following measurement:
Residual solder
tank
Filter Tube
10
USER MANUAL
Ceramic filter