Technical Data - Vevor Gb-Go12A-R Bedienungsanleitung

Assembly
WARNING: Whilst every effort has made in manufacture of your barbecue
to remove any sharp edge, you should handle all components with care to
avoid accidental injury.
Tools required: Either a Philips cross head or flat-bladed screwdriver and
either a spanner (we have supplied a multi-function spanner ) or a pair
pliers.
ASSEMBLY:
Please read all instructions thoroughly before proceeding. Find a large,
clean area in which to assemble your trolley barbecue. Please refer to the
parts list and assembly diagram as necessary. The assembly of the
barbecue involves many large parts and it is recommended that two
people assemble it.
NOTICE: Make sure all the plastic protection rip off before assembling!

TECHNICAL DATA

GB-GO13A:Total heat input: 4 kW
Gas consumption: G30: 291g/h, G31: 286g/h
Gas bottle: Gas cylinder height could not exceed 0.6m,The diameter of
the cylinder shall not exceed 310 mm.
Make sure the gas cylinder is lower than the gas connection/gas inlet
Always place gas cylinder/bottle on a flat level surface. DO NOT fix on
trolley. Care should be taken so the gas hose and gas cylinder do not
come in contact with hot surfaces or sharp edges, and should not pass
under the barbecue
Pressure reducer: comply with EN 16129:2013 (Flow rate: max. 2 kg/h)
Gas hose: comply with EN standard or local market standard (max. 1.5m,
max. FI 1.2m)
Gas system information:
This English version of data plate is just for NB checking. All information
below would be translated into the official language of the destination
country in mass production.
- 3 -