VEVOR GB-GO12A-R Bedienungsanleitung Seite 13

appliance. It is important that the ventilation openings of the appliance are
not obstructed. The barbecue must be used on a level, stable surface.
The appliance should be protected from direct draughts and shall be
positioned or protected against direct penetration by any trickling water
(e.g. rain).
Make sure that the gas cylinder compartment (if any) is not obstructed,
keep it ventilated and clean.
Parts sealed by the manufacturer or his agent must not be altered by the
user. No modifications should be made to any part of this barbecue and
repairs and maintenance should only be carried out by a CORGI
registered service engineer.
Connection to Appliance
Before connection, ensure that there is no debris caught in the head of the
gas cylinder, regulator, burner and burner ports. Spiders and insects can
nest within and clog the burner/venturi tube at the orifice. A clogged
burner can lead to a fire beneath the appliance.
Clean burner holes with a heavy-duty pipe cleaner.
Fit the hose to the appliance using a spanner to tighten it onto the
connection thread. If the hose is replaced it must be secured to the
appliance and regulator connections with hose clips. Disconnect the
regulator from the cylinder (according to the directions supplied with the
regulator) when the barbecue is not in use.
The Barbecue must be used in a well ventilated area. Do not obstruct the
flow of combustion air to the burner when the barbecue is in use. ONLY
USE THIS BARBECUE OUTDOORS.
BEFORE USE CHECK FOR LEAKS
Never check for leaks with a naked flame, always use a soapy water
solution
TO CHECK FOR LEAKS
• Make 2-3 fluid ounces of leak detecting solution by mixing one part
washing up liquid with 3 parts water.
• Ensure the control valve is "OFF".
• Connect the regulator to the cylinder, and connect the on/off valve to the
burner to ensure that the connection is secure, and then turn on the gas.
• Brush the soapy solution onto the hose and all joints.If bubbles appear,
- 11 -