Installation Complete Photo
WARNINGS INFORMATION
IMPORTANT:
Read the following instructions carefully and be sure your barbecue is
properly installed, assembled and cared for.Failure to follow these
instructions may result in serious bodily injury and/or property damage.
If you have any questions concerning assembly or operation, consult your
dealer or LPG Gas Company.
When using on the ground, always place the appliance and cylinders on a
flat surface.
Your barbecue can be used with gas cylinders between 5 kg and 15
kg.Follow the technical information as stated in the instruction
manual and check with your local gas supplier to have a suitable gas
cylinder for your barbecue.
NOTE FOR CONSUMER: Retain for future Reference
CONNECTING THE GAS CYLINDER TO THE APPLIANCE
This appliance is only suitable for use with low-pressure butane or
propane gas or LPG mixtures, fitted with the appropriate low-pressure
regulator via a flexible hose.
The hose should be secured to the regulator and the appliance with hose
clips. Make sure the flexible hose could not come in contact with hot
surface and avoid twisting.
Use a suitable regulator that is certified to EN 16129:2013. Make sure the
regulator and flexible hose comply with local code.
Please consult your LPG dealer for information regarding a suitable
- 9 -